KET4CleanProduction – How to implement a successful RIS3 Strategy

Download Article

By  Anastasiia Konstantynova (Steinbeis 2i GmbH), Kristin Dallinger (Steinbeis 2i GmbH) and Heike Fischer (Steinbeis 2i GmbH)

Introduction

Have you ever felt like reinventing the wheel? Or would you rather use the wheels you already have more effectively? We suspect the latter…

This line of thought, is worth bearing in mind when developing new policies. It is better to take stock of available concepts, instruments and tools, identify new possibilities stemming from them, and develop potential synergies, than to begin from scratch and reinvent the wheel.

The same metaphor can also be applied to “technology” or “knowledge” transfer, the daily work of Steinbeis 2i GmbH. An institution focused on building the capacities of regional enterprises, so that they can pass through the so-called ‘valley of death’ between pure research and innovation. Steinbeis 2i GmbH facilitates the transfer of technology, both hard (e.g. new products, materials), and soft (e.g. academic concepts and policy findings) from theory to practice. This includes engagement with public and private institutions, such as ministries, business development agencies, universities and especially small and medium enterprises (SMEs). Steinbeis 2i GmbH, does not so much create new innovations, but it does make it more likely for their stakeholders to develop their own innovations.

A recent opportunity to engage in this form of ‘knowledge transfer’ was the annual European Week of Regions and Cities (EWRC) in Brussels. Specifically, the focus of this article was a session on “Revitalising Regional Economies through Smart Specialisation and Industry 4.0”, organised by Regional Studies Association, which looked at the experiences of the successful implementation of the Research and Innovation Strategies for Smart Specialisation (RIS3).

Two points stood out in this session, the first was that when participants were surveyed, 50% of them agreed or strongly agreed that their region had clearly adopted a RIS3 strategy. However, at the same time, when asked where there is a need for deeper learning and exchange between regions and stakeholders, the majority of respondents answered: RIS3 implementation. Considering this anomaly, this article returns to the theoretical roots of RIS3 and provides an example from practice, which could serve to build ideas and synergies for the successful implementation of RIS3, without the need for reinventing the wheel.

Smart Specialisation as methodology

At the core of RIS3, lies the economic concept of specialisation. In reference to e.g. Ceapraz (2008) the economic arguments in favour of specialisation stem from the theory of comparative advantages. Whereby, concentrating on the production of specific products or services, economies of scale can reduce the marginal costs per unit of production and increase profits. Furthermore, specialisation is thought to have localised effects, creating forward and/or backward linkages (spill-overs) into other industries and sectors, ultimately leading to more inclusive economic growth. An example for this could be a dairy farm, where an increase in the production of processed milk products, could have backward linkages to the farms and forward linkages to the distribution or logistics sector.

Smart specialisation can therefore be seen as an innovative policy concept, as it emphasises the principle of prioritisation in a ‘vertical’ logic, or in other words it selectively favours some technologies, economic activities and firms. The concept also serves as a methodology to identify these desirable areas, which can then be targeted with policy interventions (Foray 2013). To this end and following Foray (2013), RIS3 should have the following goals:

• A vertical and non-neutral logic of intervention,
• An entrepreneurial discovery process where market forces are kept working,
• An interactive process between policy and the private sector,
• An activity – as the right level of intervention,
• An experimental nature of policy design.

In its routes, the concept of smart specialisation was developed by a group of scholars in 2008 (Foray, David and Hall 2009) and then integrated into the policy concept. Therefore, during its lifetime of around 10 years the theoretical concept of smart specialisation has made a significant impact on the policy landscape. This is evident though such examples as

• Launch of S3 Platform, that aims to bring in and share different experiences and knowledge on RIS3 from theoretical up until empirical side,
• Setting the concept of RSI3 as the basis for Smart Specialization Strategies, that became a conditionality for regional funding across European regions,
• Initiation of activities by different international institutions, such as OECD and the World Bank, e.g. studies and policy advice following the principles of RIS3.

Moreover, spreading the theoretical and policy concept of RIS3 even beyond the boundaries of the European Union, e.g. by initiating the piloting of RIS3 design and implementation in EU Neighbouring countries, among others in Ukraine and Serbia.

RIS3 Policy

In terms of the policy following Foray (2013) RIS3 in the European Union is recognised for:

• Advocating focused public investment in research, development and innovation activities on a few, carefully chosen priority domains, where the impact can be greater.
• Creating space for different policies, especially: innovation, industrial, SME and cluster, to step out of their traditional responsibilities and build synergies between them for a greater impact.
• Bringing openness and transparency to the policy-making process by encouraging stakeholder dialogue focused on business and policy needs.
• Improving institutional capacity by stimulating inter-ministerial cooperation, exchanges between international and national experts.

At the same time, from the policy perspective RIS3 also faces several dilemmas and challenges. In terms of dilemmas, these are according to Foray (2013):

• Space, meaning the administrative and geographical level appropriate for smart specialisation to take place.
• Time, as in different sectors and different activities the impact of smart specialisation could be different, therefore, hindering the generalisation and application of policy instruments.
• Evolving priorities and the continuity of policy, meaning as global and local economic, political and technological trends are constantly evolving, so are policy priorities, but also their life span, which respectively relates to the previous dilemmas of space and time.

These dilemmas are closely related to the two main RIS3 challenges: i) identification of the activities for the vertical policy prioritisation ii) prioritisation of domains for strategic policy support. In this article, more attention will be given to activities and their identification, as they are more closely related to RIS3 implementation.

RIS3 Implementation

The implementation of RIS3 is critical to the success of smart specialisation strategies. Especially now, as since the 2014-15 period, EU regions have already begun to implement RIS3 and have adopted a variety of different participatory models and evidence-based practices to identify and support potential domains of specialisation.

In this light, the goal, but also the motor of RIS3 – as highlighted by European Commission (2016) and stressed by Foray (2013) – is in promoting Entrepreneurial Discovery Process (EDP). This is the process that enables prioritisation of investment, based on an inclusive and evidence-based process driven by stakeholders’ engagement and attention to market dynamics.

However, EDP is not the only driver in the RIS3 implementation. It works exclusively with the following main elements of RIS3 implementation that are strengthened by considering the principles of Good Governance (European Commission 2016):

• Project selection in funding programmes – refers to the selection of specific projects and funding programmes, which have the strongest logical connection with RIS3 and related programmes. This creates a better fit with strategic policy objectives, by assuring trust and reliance in the calls for funding and their purpose.
• Structural and legislative changes – refers to the means of adjusting structural and legislative norms, particularly by aligning them with vertical policy objectives and assuring that these changes are also discussed with wider related institutions.
• Updating priorities through a continuous EDP – refers to the revision of the strategic priorities by means of EDP as a participatory approach including actors from businesses, start-ups and policy makers.
• External cooperation – refers to the need for external engagement and benchmarking. Benchmarking ensures not only a better understanding of the current situation, but provides an opportunity to learn about new trends and ideas. Including external observers in the implementation process also provides a further mechanism to learn from others and also allowed gaps in expertise to be filled.
• Audit and State aid – refers to the need for audits, as an oversight on the use of public money and as a means to ensure projects remain aligned to strategic objectives.

Monitoring and evaluation – have always been a necessary instrument for monitoring progress, accounting for public expenditures, but also as means for facilitating transparency and learning.

Activities as the right level of policy intervention

Next to EDP, the activity has been considered as an essential component and a right level for successful implementation and targeting of RIS3. The advantage of identifying and supporting the implementation through the right activity is that it neither reflects the whole sector nor one single firm, but rather functions as an instrument, which can drive all aforementioned RIS3 goals, especially EDP.

The rationale for supporting the activities behind the implementation of RIS3, is that they generate new and innovative processes, which can drive EDP and target RIS3 objectives.

According to the European Commission (2016) activities should:

• Show potential – aim at experimenting and discovering technological and market opportunities and have the potential to provide learning spill-overs to others in the economy
• Have scale and agglomeration economies or address the characteristics of coordination failures.

To identify new activities as a target level for intervention, one should assess the existing initiatives already present in the ecosystem. These activities would principally follow the 3 main characteristics:

• Include different stakeholder groups – engaging actors, such as SMEs, public authorities, clusters, etc.,
• Engage various administrative levels – activities that address several levels of administration, e.g. EU, national, regional, municipal, etc.,
• Promote new activity types – such as projects, events, programmes, etc.

The re-invention of the wheel is therefore not needed, but rather the identification of existing and potential activities that would foster synergies between existing and planned policy instruments and facilitate RIS3 implementation.

The case of KET4CleanProduction

Moving from theory to practice, the following section describes an example of a project, implemented by a consortium of 20 partners from 18 different EU countries with coordination of Steinbeis 2i GmbH, which hopefully provides an exemplar for where and how to find the stock of activities that can be identified and applied to facilitate a successful implementation of RIS3.

The project is KET4CleanProduction. It is an EU funded CSA project under H2020-INNOSUP-03-07-08-2017 “Technology services to accelerate the uptake of advanced manufacturing technologies for clean production by manufacturing SMEs”.

The project goal is to create Pan-European access for manufacturing SMEs on technology services for clean production, through a network of premier KET Technology Centres (KET TCs) with one-stop-shop access including members of the Enterprise Europe Network (EEN) and policy makers on regional innovation strategy.

By aligning clean production with key enabling technologies, it was felt that these technologies could contribute to building or strengthening competitive advantage for business growth.

The KET4CleanProduction project addresses clean production challenges by promoting the use of advanced manufacturing technologies and relevant key enabling technologies (KET) by achieving following objectives:

• Reaching out to manufacturing SMEs across the EU-28, with the support of the Enterprise Europe Network (EEN),
• Raising awareness on the potential of clean production innovation for increasing product quality, productivity and environmental performance,
• Facilitating SMEs connectivity to KET TC into joint project proposals for micro grants.

Through this process partners from 18 different countries were brought together to represent two main groups:

• Premier-class EU-based technology infrastructures in the field of Key Enabling Technologies (KET), and
• EEN organisations in countries with a dependence on manufacturing and difficulties with KET access.

More detailed information on the project is provided on the web-platform that serves as an online one-stop-shop access for the relevant stakeholders (Figure 1).

Figure 1: Online platform as one stop shop eco-system for clean KET based production accessible via https://www.ket4sme.eu/

To explore the synergies of KET4CleanProduction project with RIS3 implementation, the following Table 1 aims to describe individual projects objectives and characteristics in their relation to RIS3 goals.

Table 1. KET4CleanProduction – alignment with RSI3 gaols

Figure 2: Phases of KET4CleanProduction

Beyond that, a more precise look is taken on the activities of the project, which are considered as the right level of intervention by RIS3. This is done by looking at the activities through the prism of three main characteristics in terms of RIS3 (Table 2).

Important to highlight, that first, the project itself can already be considered as an activity that facilitates RIS3 implementation. Second, also a number of initiatives developed and promoted within the project serve as an inspiration for the activities supporting RIS3 implementation.

Table 2. Characteristics of activities promoted by KET4CleanProduction

Conclusions

The given example, which is EU funded project KET4CLeanProduction, shows that successful implementation of RIS3, might not require a ´reinventing the wheel´. Rather, it can focus on exploring existing opportunities in the eco-system that align with RIS3 goals. The identification of the existing activities can then be used to develop RIS3 initiatives.

Based on our experiences working in this field we therefore make the following suggestions to anyone undertaking to implement a RIS3 strategy:

1. Screen for existing programmes and initiatives that are
   1. aligned with RIS3 goals
   2. Are already developed and can stimulate the Entrepreneurial Discovery Process.
   3. Share three key characteristics:
      1. Include different stakeholder groups;
      2. Operate at various levels of engagement

• Involve different activity types.

2. Finally these initiatives should be built on constant curiosity, experimentation and the exploration of new opportunities stemming from identified domains and activities.

References

European Commission (2016): Implementing smart specialization strategies. A Handbook. Luxembourg: Publications Office of the European Union

Foray, D. (2013): Economic principles of smart specialisation, Ekonomiaz n. 83, cuatrumestre

Foray, D., David, P.A., and Hall, B. (2009): Smart specialisation – the concept, Knowledge Economists Policy Brief No. 9.

Ion Lucian Ceapraz (2008): The concepts of specialisation and spatial Concentration and the process of economic Integration: theoretical relevance and statistical Measures. The case of Romania’s regions. In the Romanian Journal of Regional Science. Vol. 2, No. 1.